Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser will protect your pride and joy against key-long theft and relay theft. With a unique PIN sequence, unless they know the code, your car won't start!
Transport Mode allows you to temporarily disable the device, which is great for servicing and transport in vehicles. It then reactivates by entering a PIN again.
No Led Indications or Key Fobs
The Ghost 2 immobiliser offers a powerful defence against modern car-theft methods. Its unrecognizable installation and engine stop-blocking can reduce the chance of your vehicle being stolen, which could offer peace of mind and potentially even save you money on insurance premiums.
It is not detectable by scanners and cannot be hacked using standard methods like key cloning or signal jamming. The device uses existing buttons in your vehicle such as those on the steering wheel, door panels and the center console to generate an individual, programmable PIN code sequence that is as long as 20 presses. If the correct sequence is entered, or if an app or beacon is used, only the vehicle owner is able to start the engine, thereby providing an extra layer of protection against thieves.
You can also enable an easy service mode for situations like valet parking and servicing that require you to temporarily disable the system. ghost 11 immobiliser makes it easy to do this, while ensuring that your vehicle is secure during the time it is being repaired. It is simple to switch to secure mode after the job is complete to ensure your vehicle is fully protected throughout the day.
In contrast to other aftermarket immobilisers that operate with a fob and a fob, the Ghost 2 can be operated directly through the vehicles existing buttons, making it far simpler to use than traditional systems. The app can also act as a spare key for emergency situations and allows you to drive your vehicle with the security off without having to enter your PIN code.
No Radio Frequency Signals
Contrary to traditional security systems which have their own dedicated remote The Ghost 2 immobiliser doesn't require any additional key fobs and can be used with buttons already on the steering wheel or the centre console. It is indetectable by thieves who employ the RF scanning technology or code grabbing, so your car will not start in the event that they get your key.
The device employs a unique 'password' sequence of buttons that locks the engine. This personalised PIN code can be entered on the app or via the buttons on the steering wheel or on the central console. This lets you lock the gear-box too, meaning your car cannot be taken away unless you have a key or are capable of entering your pin code. The device can also be set to Transport mode, which lets you drive your vehicle without entering the PIN code and providing your vehicle with additional security when it's left for service or valet parking.
The Ghost 2 immobiliser was designed to be as discrete as possible as a theft deterrent. This is a great choice for those who spent a lot on customising their vehicles or own expensive or rare vehicles. Many have reported that this is a great option to guard their cars from being stolen and even share stories of attempted thefts stopped by the device. The Ghost 2 is also very versatile. Customers report that it works with their regular keys as well as with the emergency button on their car, giving them peace-of-mind when they're away from their car.
No Radio Frequency Scanners
Ghost immobilisers safeguard your vehicle from key theft and cloning. The system makes use of the buttons on your vehicle, like those on the dashboard and your steering wheel to create a unique and programmable button sequence that only you can identify. Your car won't start without this sequence. The combination of a distinct disarm sequence and the absence of radio frequency signals makes the device extremely difficult to hack or evade.
The Ghost CAN Immobiliser is a safer alternative to devices that are approved by Thatcham that rely on radio frequencies scanning. It operates completely silently, without external signals and does not rely on any external signals. It is a safer alternative and is protected if installed by a TASSA-approved installer (we are one of them!) ).
It is highly recommended that you hire a professional installer install the Ghost immobiliser. This is due to the way it works with your vehicle. This will ensure that it is completely integrated into your vehicle's systems, resulting to optimal performance and lower chance of malfunction.
Professional installation is often with warranties and support to increase the value of your purchase. This is a major security feature that deters thieves who are less likely to make any attempt to bypass the device because of its extensive security features and skilled installation.
As well as being an effective deterrent to thieves As well as a great deterrent to thieves, the Ghost is designed to be user-friendly too. It can be programmed to automatically re-arm for a specific amount of time after you have parked your car. This means you don't have to remember your PIN every time. It also allows the flexibility of Service/Valet Mode if you have to hand your vehicle to a service or valet parking. This can be turned on or off depending on your preference. a simple indication sequence.
No Wire Cutting
The Ghost 2 is non-invasive and doesn't require wire cutting during installation. It connects to the vehicles CAN data network and is equipped with a unique PIN code, preventing anyone else from starting your engine if they don't have a unique PIN sequence or app authorization.
It's also quiet because it doesn't emit radio signals like some other immobilisers. It's weatherproof, sealed, and tiny enough to be concealed in any vehicle, making it virtually impossible to find.
The Ghost II also has the capability to be placed into a 'transport mode, which enables it to be used for short durations without the requirement of a personal PIN. This is ideal for situations such as lending the car to a family member, or in an emergency. You can start your vehicle quickly and securely.
It is important to work in a well-lit space when installing the Ghost II. You should wear safety gear when working with electrical components and tools. A basic set will allow you to make precise connections. A multimeter will help verify electrical values, and make sure that your wiring is safe. Insulation tape and cable ties can be used to shield or join any exposed or cut wires that are exposed during the installation process.
It's important to disconnect the battery in your vehicle prior to beginning any wiring work. This will stop any accidental airbag deployments or electrical shocks from happening in the event that the battery is accidentally disconnected while the Ghost II is still connected to the vehicle's system.
Easy to Install
The Ghost immobiliser is a distinctive next generation device that works by connecting directly to the vehicles CAN Data Network and using a unique PIN Code to stop your vehicle from getting started. This makes it more difficult to hack than conventional key fobs and alarm systems, and provides superior security against key cloning hacking, as well as relay attacks.
autowatch ghost immobiliser can be concealed within your vehicle, and it uses the buttons on the dashboard and your steering wheel to create a unique sequence that you only know. This prevents thieves from being able use a cloned key to start your vehicle. It can also stop them from using the diagnostic tool that thrives on hacking the OBD.
Installation is simple and does not require cutting wires. The unit is connected to the vehicle's CAN bus through a constant 12V supply identified and a grounding connection. Hand tools of a basic nature are sufficient to install the unit, and a multimeter can assist in locating the right wires. Insulation tape or heat shrink tubing is recommended to safeguard the connections and cable ties are a good option to keep the wiring neat and tidy.
After installation, the device is in a learning mode, and records your unique buttons and sequences to create your unique pin code. This information is stored in the CAN network which makes it nearly impossible for anyone else to duplicate your sequence and then start your vehicle.
Transport Mode is a feature that can be utilized in an emergency if you forget your PIN code, sell your vehicle or a button becomes inoperative. This will disable the Ghost System completely, but it will automatically reactivate when you exceed 31mph for more than 15 minutes, or enter your PIN Code. This is ideal for people who frequently rent their vehicles on services like Turo or ZipCar.